From icomp RR-Net MK3
RR-Net MK3 is the direct follow-up product to the popular 10MBit networking cards for the C64 that we've provided for over 10 years.
Other than previous announcements, we've decided to continue using the same ethernet chip that we've used on the two predecessor models: The Crystal CS8900a. That means: All networking software that is already available for the C64 will work on this new networking card out-of-the-box: Contiki, Codenet and WarpCopy can be used in their current versions without the need to wait for any update!
With RR-Net MK3, we're answering the calls from many C64 users who wanted Ethernet, but refused to buy a "carrier card" that features the clockport that was previously required for operating one of the predecessor models (for example Retro Replay, MMC64, MMC Replay or Chameleon). The result of this new development is that the new design can be used in two ways: You can either connect it to the clockport of a carrier-card (exactly the same way like the predecessor RR-Net MK2), or you can plug it directly to the expansion port of the C64.
If plugged to an MMC Replay or Chameleon, you can still close your cartridge case. For plugging directly to the C64, a cartridge case cannot be used.
One added feature of this new design is the 8k flash rom. This is used as a startup-ROM if the unit is plugged directly to a C64. If you plug RR-Net MK3 to the clockport of a "carrier card", only a few bytes of the ROM are available - just enough to store the MAC address of the unit, and put an end to the constant guessing that you had to do with the predecessor models.
Pictures show the prototype of the unit. Actual appearance will vary: PCBs will be a different colour, LEDs will be different colour and contact fingers will be gold. Package only includes RR-Net MK3 and an instruction sheet. Software not included, but available for free download.
Good to have other sources though.