i have it
http://www.wiwi.uni-frankfurt.de/~andreas/prologic.zip
everything explained. i have this board too, working, if you have any questions feel free to ask
masterhit
| retrohackers.org https://retrohackers.org/ |
|
| ProLogicDos Boards https://retrohackers.org/viewtopic.php?f=1&t=255 |
Page 1 of 2 |
| Author: | zap [ Wed Apr 25, 2007 2:29 am ] |
| Post subject: | ProLogicDos Boards |
Goo day all.... I bought a sx-64 it has a ProLogic Dos Cart and 1541 interface with it. Does anyone have a manual or any info on it... Maybe a web address ... It consits of 3 boards A cartridge board it has 2 edge connectors on each end -- 2 cable connectors -- a female edge connector for an other cart -- large chip and a place for another 28pin chip possably eprom this i am interested in--. 2 boards that connect to the inside of a 1541 drive.. by a small blue ribbon cable... I am going to try to install it i am looking for any info on this item.. ohh the sx-64 have a custom bios prologic dos installed do i need this to make it work if so is there a c64 version... Any info would be welcome.. P.S the webserver is getting lots of hits http://www.c64web.com |
|
| Author: | masterhit [ Wed Apr 25, 2007 1:49 pm ] |
| Post subject: | |
i have it
http://www.wiwi.uni-frankfurt.de/~andreas/prologic.zip everything explained. i have this board too, working, if you have any questions feel free to ask masterhit |
|
| Author: | zap [ Wed Apr 25, 2007 2:02 pm ] |
| Post subject: | |
Thanks mate i need a copy of the eprom thats missing from the cart board. Thanks i bought a sx64 and this was inside but not working it was placed on the ribbon cable for the cart socket... i have fixed this now i would like to get it going on my c64.... 
|
|
| Author: | masterhit [ Wed Apr 25, 2007 4:13 pm ] |
| Post subject: | |
zap wrote: i bought a sx64 and this was inside but not working it was placed on the ribbon cable for the cart socket... i have fixed this now i would like to get it going on my c64....
patrick van der poel offers the dumps. http://www.pjvdpoel.demon.nl/ greetz |
|
| Author: | zap [ Tue May 15, 2007 12:29 pm ] |
| Post subject: | |
masterhit wrote: zap wrote: i bought a sx64 and this was inside but not working it was placed on the ribbon cable for the cart socket... i have fixed this now i would like to get it going on my c64.... patrick van der poel offers the dumps. http://www.pjvdpoel.demon.nl/ greetz on the cartridge pc board is there a eprom on yours or is there a empty socket for a eprom... there dumps for this board dont appear to be on there can i get a dump of yours... i have a dump of pro logic dos that came with the sx64 but its on the motherboard not the cart is this the same... once i get it working i plan the sell it on ebay should be collectable.... have fun shane p.s the manuel is in ??? i am english. |
|
| Author: | masterhit [ Tue May 15, 2007 12:57 pm ] |
| Post subject: | |
zap wrote: on the cartridge pc board is there a eprom on yours or is there a empty socket for a eprom... there dumps for this board dont appear to be on there can i get a dump of yours... i have a dump of pro logic dos that came with the sx64 but its on the motherboard not the cart is this the same... once i get it working i plan the sell it on ebay should be collectable.... have fun shane p.s the manuel is in ??? i am english. The manual is german... as the inventor was a germ (hehe). Your empty socket on the c64 side of the system contains normally a kernal and basic rom iirc. The advantage of this setup is that you do not need to solder in your C64 (there was also sold a proloDos-system with a internal kernal replacement). 1 thing HAS to be done to get it working properly: one has to connect the cpus hiram line to a plug on the prologic Dos Cartridge. im trying to dump tonight (not in the toilet, i mean the ROM !!!), also doing some pics of the hiram line! HM. i recall that the roms were all in the UNEMULATED zip file on patricks site: http://www.pjvdpoel.demon.nl/Roms/Unemulated.zip have an ice time, masterhit |
|
| Author: | zap [ Tue May 15, 2007 1:29 pm ] |
| Post subject: | Thanks... |
masterhit wrote: zap wrote: on the cartridge pc board is there a eprom on yours or is there a empty socket for a eprom... there dumps for this board dont appear to be on there can i get a dump of yours... i have a dump of pro logic dos that came with the sx64 but its on the motherboard not the cart is this the same... once i get it working i plan the sell it on ebay should be collectable.... have fun shane p.s the manuel is in ??? i am english. The manual is german... as the inventor was a germ (hehe). Your empty socket on the c64 side of the system contains normally a kernal and basic rom iirc. The advantage of this setup is that you do not need to solder in your C64 (there was also sold a proloDos-system with a internal kernal replacement). 1 thing HAS to be done to get it working properly: one has to connect the cpus hiram line to a plug on the prologic Dos Cartridge. im trying to dump tonight (not in the toilet, i mean the ROM !!!), also doing some pics of the hiram line! HM. i recall that the roms were all in the UNEMULATED zip file on patricks site: http://www.pjvdpoel.demon.nl/Roms/Unemulated.zip have an ice time, masterhit Thanks mate for the dump hope it did'nt hurt.. 
|
|
| Author: | masterhit [ Wed May 16, 2007 8:33 am ] |
| Post subject: | |
so. dug out my prommer this morning and dumped the bitch. its a 2764 no pics yet, sry... http://www.wiwi.uni-frankfurt.de/~andreas/prologic.bin regards masterhit edit: i checked the "unemulated.zip" file on pvdp s site: inside is another zipfile called "prodos.zip" this contains the same rom called kernal.rom
|
|
| Author: | zap [ Tue Jun 12, 2007 1:35 pm ] |
| Post subject: | Thanks Mate |
Sorry not to have got back to you sooner. Thanks.... p.s patricks site is down .... |
|
| Author: | zap [ Tue Jun 12, 2007 2:13 pm ] |
| Post subject: | hello |
email me |
|
| Author: | masterhit [ Wed Jun 13, 2007 6:22 am ] |
| Post subject: | Re: Thanks Mate |
zap wrote: Sorry not to have got back to you sooner.
Thanks.... p.s patricks site is down .... "Because of some Legal issues I’m forced to close the commodore cartridges and roms site. My apologies to all the people who provided cartridges, roms and a redesigned website. I’d realy want to put it online, but I simply can’t. Patrick " hmpf. well, in december i decided to give patricks site a lew look, i sadly copied not everything.... if you want to take a look how i thought it should look
http://masterhit.dyndns.org/pvdp (aboves url is my desktop, its only active from 8 am till 7 pm) have fun, nils |
|
| Author: | gklinger [ Wed Jun 13, 2007 6:14 pm ] |
| Post subject: | Re: Thanks Mate |
masterhit wrote: sadly copied not everything....
Too bad. Do you know what you missed? Maybe we can find things elsewhere and recreate the archive. A lot of the games can be found on Mayhem's website so there's no need to duplicate all of his hard work. Say, would you be willing to share what you did manage to copy? One big zip uploaded to Divshare would be useful. |
|
| Author: | MagerValp [ Thu Jun 14, 2007 8:18 am ] |
| Post subject: | |
Here's a zip of masterhit's copy (hope you don't mind :): http://www.cling.gu.se/~cl3polof/pvdp.zip |
|
| Author: | tnt/beyond force [ Thu Jun 14, 2007 10:05 am ] |
| Post subject: | |
I will check that against my copy (mirrored some time last year IIRC) when I have time. |
|
| Author: | masterhit [ Thu Jun 14, 2007 3:39 pm ] |
| Post subject: | |
tnt/beyond force wrote: I will check that against my copy (mirrored some time last year IIRC) when I have time.
perfect
i didnt copy most of the carts. i did copy the manuals and the roms. so just paste your /Cartridges fodler to my archieve and we have a working copy
i also found someone willing to host it
more l8r masterhit |
|
| Page 1 of 2 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|